FreeRider 4 Switch iPAD Interface

ipadswitch2

The FreeRider-IPAD4 is a switch access interface device to provide for switch input to iPads and iPhones.

Using the Bluetooth communications between your device and the FreeRider interface you are able to switch control AAC applications as well as control your device.

 

 

The FreeRider iPAD Interface Unit incorporates a integral lithium ion battery which is charged via the USB connector using the supplied USB lead. Whilst charging the charging lamp is illuminated blue, when the charge is complete the lamp is extinguished. In use the FreeRider unit monitors the battery charge and when  a recharge is required the unit will give a short beep sound and flash the low battery lamp.

Connecting to the iPad Bluetooth connection is indicated by the ON/Connected lamp changing from flashing red to steady green.

You can connect up to 4 switches to your FreeRider. Each switch corresponds to a keyboard key as is listed in the table below.

Switch Key
1 SPACE
2 ENTER
3 RIGHT ARROW
4 LEFT ARROW

ipadswitch4Switch with iPad and FreeRider interface device

 

From version  IOS7 operating system a facility in the setting menu was included for switch access.

Select the switch access menu and configure the switch control you need by remapping the FreeRider Interface switch actions to the ones you want to use in the iPad.

  • Dimensions: ABS case 111 x 75 x 25mm.
  • Battery: Lithium Ion 1A 3.7Volt.
  • Charging connection: micro USB Charging current: 200mA.
  • Illuminated indicators for Bluetooth connection, battery charging and low battery with additional audio tone warning.

Price: £149.00

Downloads:

Product Information
VAT Exemption Form

Portset Systems Ltd reserves the right to change the specification of its products without notice.

Portset  and FreeRider are registered trademarks.

Facebook Twitter Digg Delicious Stumbleupon Technorati Email
Category: SEN products
Visit Us On Twitter